Aw fɔ Ɔpreshɔn Ɔtomatik Smɔl PET Tɛmofɔmin Mashin

Aw fɔ Ɔpreshɔn Ɔtomatik Smɔl PET Tɛmofɔmin Mashin

Di thermoforming mashin we gɛt panɛl ɔt, lɔw pawa kɔnsɔmshɔn, smɔl ɛksternal futprin, ikɔnomik ɛn prɛktikal. So dɛn kin yuz di mashin bɔku bɔku wan fɔ mek lid, kɔva, tre, plet, bɔks.

As profeshɔnal manifakta fɔ Smɔl PET Tɛmofɔmin Mashin dɛn, wi go gi wan ditayl ɔvaviu fɔ di mashin in opareshɔn prosidyuz fɔ ɛp di wan dɛn we de yuz am fɔ ɔndastand ɛn yuz am mɔ.

1: Inspekshɔn fɔ di Envayrɔmɛnt

Bifo yu ɔpreshɔn di PP lid tεrmoforming mashin, i impɔtant fɔ inspɛkt di say we dɛn de wok.

1.1.1. Tɛmpratura ɛn Humiditi: Di ​​fayn opareshɔn ɛnvayrɔmɛnt fɔ wan thermoforming mashin tipikli de frɔm 15°C to 30°C in tɛmpracha ɛn 30% to 80% in humiditi. Di tɛmpracha ɔ humidity lɛvɛl kin afɛkt di mashin in wok ɛn layfspan bad bad wan.

1.2.2.2. Sefty Ikwipmɛnt: Verifay if sef ikwipmɛnt de lɛk faya ɔt ɛn imejensi stɔp bɔtin fɔ mek shɔ se dɛn ebul fɔ ansa kwik kwik wan we imejensi.

2: Fɔ Pripia ɛn Mentɛnans di Ikwipmɛnt dɛn

2.1.2.1. Ɔltɛm, yu fɔ rɔb di Mashin we de mek tɛm fɔ mek di kɔp lid’s transmishɔn kɔmpɔnɛnt dɛn (lɛk biɛrin ɛn slayd rel) ɛvri mɔnt (duya yuz ay-tɛmpracha rɛsistɛns lɔbrikɛt ɔyl).

2.2.2.2. Kip di Thermoforming Cup Lid Machine klin ɔltɛm. Wap di mashin wit kɔtɔn klos bifo ɛn afta ɛni tɛm we yu yuz am fɔ mek i klin.

2.3. Chek di gia ɔyl we de na di ridyusɔ ɔltɛm ɛvri ia fɔ si if dɛn nid fɔ ful-ɔp am ɔ chenj am.

3: Paramita Sɛtin ɛn Dibɔg Tɛst

Prɔpa paramita sɛtin ɛn dibɔg tɛst impɔtant fɔ mek di tɛmfɔmin mashin prodyuz ay kwaliti prɔdak.

3.1.1. Temperature Adjustment: Pres di stat bɔtin fɔ aktiv di Thermoforming Cup Lid Machine. Set di aprɔpriet ɔt tɛmpracha akɔdin to di raw matirial ɛn fɔm prɔses rikwaymɛnt, ɛn kɔndɔkt wan trayal mold verifyeshɔn fɔ mek shɔ se di tɛmpracha paramita dɛn kɔrɛkt.

3.2.2. Prɛshɔn Ajɔstmɛnt: Adjɔst di Kɔp Lid Tɛmofɔmin Mashin in prɛshɔn sistɛm fɔ mek i gɛt di rayt mold prɛshɔn.

3.3. Spid Ajɔstmɛnt: Adjɔst di Lid Tɛmofɔmin Mashin's opareshɔn spid akɔdin to di prɔdak rikwaymɛnt ɛn molding prɔses nid. If yu spid pasmak, dat kin mek yu nɔ kɔmplit fɔ mol ɔ yu nɔ gɛt di kwaliti fɔ di prɔdak.

4: Sefty Trenin ɛn Ɔpreshɔn Prosidyu

Sefty trenin ɛn opareshɔn prosidyuz na wan impɔtant pat fɔ hot fɔm mashin ɔpreshɔn.

4.1.1. Di we aw fɔ stat ɛn stɔp: Di wan dɛn we de wok fɔ no di kɔrɛkt we aw fɔ stat ɛn stɔp ɛn ɔndastand aw fɔ yuz impɔtant tin dɛn lɛk imejensi stɔp bɔtin ɛn pawa switch.

4.2.2.2. Trobul: Di wan dɛn we de wok fɔ gɛt kɔmɔn we fɔ no di fɔlt ɛn fɔ sɔlv di prɔblɛm fɔ ansa kwik kwik wan ɛn tek di rayt imejensi mɛsej we di ikwipmɛnt nɔ de wok fayn.

Spɛsifi k ɔpreshɔn stɛp dɛn kin difrɛn difrɛn wan dipen pan di mashin mɔdel ɛn di prɔdak. Bifo yu yuz ɔtomɛtik smɔl PET tɛmɔfɔmin mashin, i impɔtant fɔ rid ɛn ɔndastand di ikwipmɛnt in opareshɔn manyual gud gud wan ɛn yuz am akɔdin to di rial kɔndishɔn.